Products

Choose the right product for your boat

Choose a category and browse products for hull protection, maintenance and renewal.

101
products: 10
categories: 3
brands

Delivery across Europe
Secure checkout and genuine products
Free expert advice

Yachts programme

39 products

International THINNER N.3

€22.00

International BOATCARE MARINE POLISH 0.5 LT

€21.77

International BOATCARE MARINE WAX 0.5 LT

€21.11

International BOATCARE POLISH AND WAX 0.5 LT

€16.66

International BOATCARE SUPER CLEANER 0.5 LT

€16.00

International BOATCARE TEAK RESTORER 0.5 LT

International Boatcare Teak Restorer is a specialist cleaning and restoring product for reviving weathered teak and other hardwoods on boats. It effectively removes greying, oxidation, stains and surface dirt, bringing back the wood's natural look and colour. It is suitable for teak decks, steps, handrails, furniture and other wooden surfaces on board. The formula penetrates the wood surface, cleans its structure and brings out the natural grain. The product is suitable for both indoor and outdoor use and for all types of hardwood. Once restoration is complete, the manufacturer recommends protecting the wood with a suitable teak oil, which extends its service life and preserves the restored appearance. Teak Restorer is biodegradable and does not harm gelcoat, aluminium, varnished or painted surfaces when used according to the manufacturer's instructions. It is suitable for routine maintenance and for restoring older wooden surfaces that have lost their original colour through weathering. Key features Restores the natural colour of teak Removes greying and oxidation from wood Brings out the natural wood grain Suitable for teak and other hardwoods For indoor and outdoor use Suitable for teak decks and furniture Biodegradable formula Does not harm gelcoat, aluminium, varnishes or paints Easy to apply and rinse off with water Note: Before use, always check the manufacturer's latest technical data sheet (TDS) and safety data sheet (SDS), which give detailed instructions on use, material compatibility, surface preparation, application conditions and safety requirements. Disclaimer: Product descriptions are provided for information purposes only. Before use, the user must always check the product's suitability, compatibility with the substrate, surface preparation requirements and application procedure in the latest official technical data sheet (TDS) and safety data sheet (SDS) issued by the manufacturer. The manufacturer's official documentation always takes precedence over general product descriptions.

€18.11

International BOATCARE UV WAX SEALER 0.5 LT

€22.10

Featured

International BOATGUARD 100

from€34.40

Featured

International CRUISER 200

from€49.50

International CRUISER 250

from€50.69

International DANBOLINE

from€31.50

International EPIGLASS HT9000 STANDARD 3.75 L

€199.50

International EPIGLASS SET PUMP HT 55/accessory/dispensing pump (applicator) (for 3.75 LT)

€35.11

International GELSHIELD 200

from€48.00

International GELSHIELD PLUS

€200.90

International GOLDSPAR SATIN 0.75 L

€45.06

International INTERDECK 0.75 L WHITE

€44.00

International INTERPROTECT

from€45.00

International micron 300

Micron 300 is a premium antifouling for the toughest fouling conditions, offering continuous performance and reduced paint build-up thanks to its polishing action. Available in dark grey only. Premium self-polishing antifouling for multi-season protection International Micron 300 is a premium self-polishing antifouling designed to give boats long-lasting protection against fouling by algae, slime, weed, barnacles and other marine organisms. It is based on Self-Polishing Copolymer (SPC) technology, which continuously renews the active surface of the coating and ensures an even release of biocides throughout the entire life of the coating. Thanks to its self-polishing action, old coats do not build up to the same extent as with conventional hard antifoulings, which simplifies maintenance and preparing the boat for future seasons. The surface stays smooth, reducing drag and helping to maintain the boat's performance. Micron 300 is suitable for use in salt, fresh and brackish water and on boats made of polyester (GRP), wood, steel and lead. It is not suitable for direct application to aluminium or galvanised surfaces. The coating can provide protection for up to two seasons, or approximately 24 months, depending on the number of coats, conditions of use and sailing area. One of the product's key advantages is that it can be applied several months before launching, giving you greater flexibility in planning your maintenance work. Key features Premium self-polishing antifouling SPC (Self-Polishing Copolymer) technology Protection against algae, slime and barnacles Up to 24 months of protection Suitable for salt, fresh and brackish water Smooth surface with low drag Reduces build-up of old coats Suitable for GRP, wood, steel and lead Can be applied up to 12 months before launching Application by brush, roller or spray Note: Before use, always check the manufacturer's latest technical data sheet (TDS) and safety data sheet (SDS) for detailed instructions on application, thinning and substrate compatibility.

€182.30

international micron 350

Micron 350 is a premium antifouling that delivers outstanding two-year protection in all conditions. The new formulation provides vibrant colours, while SPC technology ensures continuous protection. International Micron 350 is a premium self-polishing antifouling designed for long-lasting protection of boats against fouling by algae, slime, barnacles and other aquatic organisms. It is based on Self-Polishing Copolymer (SPC) technology, which continuously renews the active surface of the coating and ensures an even release of biocides throughout its entire service life. Premium self-polishing antifouling for multi-season protection International Micron 350 uses advanced SPC (Self-Polishing Copolymer) technology, in which the coating polishes away evenly while the boat is in use. This continuously renews the active protective layer, prevents thick layers of old paint from building up and keeps the hull surface smooth. Lower water drag helps preserve sailing performance and ensures effective biocide release even while the boat is laid up. Micron 350 is suitable for use in salt, fresh and brackish water and on boats made of polyester (GRP), wood, steel, cast iron and lead. It is not suitable for direct application to aluminium or galvanised surfaces. The coating can provide protection for up to two seasons, or approximately 24 months, depending on the number of coats, operating conditions and cruising area. One of its key advantages is that it can be applied up to 12 months before launching, giving you greater flexibility when planning maintenance work. Key features Premium self-polishing antifouling SPC (Self-Polishing Copolymer) technology Protection against algae, slime and barnacles Up to 24 months of protection Suitable for salt, fresh and brackish water Smooth surface with low water drag Reduces build-up of old coating layers Suitable for GRP, wood, steel, cast iron and lead Not suitable for aluminium or galvanised surfaces Can be applied up to 12 months before launching Fast drying time Application by brush, roller or airless spray Note: Always check the manufacturer's latest Technical Data Sheet (TDS) and Safety Data Sheet (SDS) before use for precise instructions on application, thinning and surface compatibility.

from€68.80

Featured

International micron 350w

Micron 350 is a premium antifouling that delivers outstanding two-season protection in all conditions. The new formulation provides vibrant colours, while SPC technology ensures continuous protection. Premium self-polishing antifouling for white underwater protection of boats International Micron 350W is a premium self-polishing antifouling based on self-polishing copolymer (SPC) technology, designed to give boats long-lasting protection against fouling by algae, slime, weed and barnacles. It was developed for use in salt and fresh water and provides reliable protection even in heavy fouling conditions. What sets Micron 350W apart is its white (Dover White) colour, offering attractive protection for boats where traditional dark antifoulings are not desired. SPC technology ensures constant polishing of the surface and an even release of biocides throughout the life of the coating. The surface stays smooth, which reduces drag in the water and helps maintain optimum performance. Micron 350W provides protection for up to 24 months, depending on the number of coats, conditions of use and cruising area. The coating reduces the build-up of old antifouling layers and can be applied up to 12 months before launching, giving greater flexibility when planning maintenance. It is suitable for boats made of polyester (GRP), wood, steel, cast iron and lead when used with a suitable primer. It is not suitable for direct application to aluminium or galvanised surfaces. Key features Premium SPC self-polishing antifouling White colour Dover White Protection for up to 24 months Self-polishing copolymer technology Protection against algae, slime and barnacles Suitable for salt, fresh and brackish water Smooth, low-drag surface Reduces build-up of old coating layers Can be applied up to 12 months before launching Suitable for fibreglass, wood, steel and lead Note: Before use, always check the manufacturer's latest technical data sheet (TDS) and safety data sheet (SDS) for detailed instructions on application, thinning and substrate compatibility.

from€68.80

International NON-SLIP ADDITIVE

€12.00

International ONE UP

from€31.52

International PRIMOCON

from€37.16

International PROPELLER PRIMER 0.25 LT red

€24.90

International SCHOONER 0.75 LT

€43.50

International THINNER 910 1 LT FAST SPRAY SOLVENT

€36.00

International THINNER N. 100 1

€37.16

International THINNER N.1 1 LT

€22.00

International THINNER N.7 1 LT

€22.00

International THINNER N.9 1 LT

€27.00

International TOPLAC PLUS

Toplac Plus is a premium topcoat for all surfaces above the waterline. It is easy to apply by roller with no need to tip off with a brush. It contains UV filters to protect against harmful sun rays and offers excellent durability. High-gloss topcoat for boats above the waterline International Toplac Plus is a one-component high-gloss topcoat based on silicone alkyd resin, designed to protect and enhance the look of all boat surfaces above the waterline. Its special chemistry delivers vibrant, long-lasting colours, excellent flow and a deep, high gloss, while UV filters protect the coating from fading and weathering caused by the sun. What sets Toplac Plus apart is its easy application with a foam roller and no need to tip off with a brush (no »roll & tip« required) – the paint flows out by itself into a smooth, glossy finish. That makes it an excellent choice for professionals and DIY boat owners alike. It is suitable for previously painted surfaces, wood, steel, aluminium and GRP (fibreglass), provided they are properly prepared and coated with the correct primer. Key features One-component high-gloss topcoat Silicone alkyd formulation for excellent flow Contains UV filters – the colour does not fade Roller application without tipping off Vibrant, long-lasting colours and high gloss For wood, GRP, steel, aluminium and previously painted surfaces For use above the waterline only Coverage approx. 12 m²/l per coat 2–3 coats recommended Pack size 0.75 l Technical data Coverage: approx. 12 m²/l per coat (theoretical 13.3 m²/l) Application: brush or foam roller Thinner: International Thinner No. 100 (approx. 10 %, above 25 °C up to 15 %) Touch dry: approx. 2 hours (at 25 °C) Overcoating: after 8 hours up to 2 days (at 25 °C) Number of coats: 2–3 (1 coat for touch-ups) Primer: International ONE UP; on aged gelcoat first apply 3 coats of Interprotect, then Perfection Undercoat ⚠️ Not suitable for surfaces permanently immersed in water. Note: Before use, always check the manufacturer's latest technical data sheet (TDS) and safety data sheet (SDS) for detailed instructions on application, thinning and substrate compatibility.

from€37.00

International TRILUX PROP-O-DREV

Trilux Prop-O-Drev is a spray-applied antifouling for propellers and metal parts that keeps fouling away and provides long-lasting protection in the water. Hard antifouling for propellers, sterndrives and underwater metal parts. International Trilux Prop-O-Drev is a hard antifouling specially developed to protect propellers, sterndrives, outboard motors, trim tabs and other underwater metal parts against fouling by algae, slime, barnacles and other marine organisms. Thanks to its special formulation, it is suitable for use on aluminium, stainless steel and other metals when used with the appropriate primer. The coating forms a durable, low-friction protective layer that helps reduce the adhesion of marine organisms to the surface. It is designed for areas where conventional antifouling coatings often lack sufficient durability due to the high loads acting on propellers and drive systems. Trilux Prop-O-Drev is applied from an aerosol can, making it easy to coat even hard-to-reach areas and complex shapes. Fast drying and simple application cut down the time needed to get the boat ready for the season. For optimum adhesion, the manufacturer recommends using the system together with International Propeller Primer or VC Prop-O-Drev Primer. The coating is suitable for use in salt, fresh and brackish water and is an effective solution for protecting drive systems against fouling throughout the boating season. Key features Hard antifouling for propellers and drive systems Suitable for propellers, sterndrives and outboard motors Protects against algae, slime and barnacles Suitable for aluminium and stainless steel Low coefficient of friction Aerosol for easy application Fast drying Suitable for salt, fresh and brackish water Use together with the Propeller Primer system For underwater metal parts of the boat Note: Always consult the latest manufacturer's Technical Data Sheet (TDS) and Safety Data Sheet (SDS) before use for detailed instructions regarding application, dilution and surface compatibility.

€43.00

International ULTRA 300

Ultra 300 is a high-quality hard antifouling designed to protect the underwater hull from fouling by algae and barnacles. It provides reliable protection for up to 12 months, even in demanding marine conditions. High-performance hard antifouling for heavy fouling conditions International Ultra 300 is a premium hard antifouling designed to give boats long-lasting protection against algae, slime, barnacles and other marine organisms. It is intended for sailing yachts, motor boats and fast craft where high protective performance and a durable coating matter. Ultra 300 provides up to a full season of protection, even in areas with heavy fouling. The coating forms a hard, abrasion-resistant surface that does not wear away significantly in use. This makes it well suited to faster boats and to owners who want to be able to clean, scrub or polish the surface without losing its protective properties. If required, it can be burnished to a very smooth finish, reducing drag and improving the boat's performance. Ultra 300 is suitable for use in salt, fresh and brackish water and on boats made of polyester (GRP), wood, steel and lead, provided the appropriate primer is used. It is not suitable for direct application to aluminium or galvanised surfaces. Thanks to its fast drying and long maximum time to launch, it allows flexible planning of maintenance work. It is suitable for both professional and leisure use and is one of the most popular hard antifoulings in the International range. Key features High-performance hard antifouling Protection against algae, slime and barnacles For use in salt, fresh and brackish water Hard, abrasion-resistant surface Can be cleaned, scrubbed and polished Up to one season of protection Suitable for fast motor boats and sailing yachts Suitable for GRP, wood, steel and lead Fast drying Apply by roller, brush or spray Note: Always consult the latest manufacturer's Technical Data Sheet (TDS) and Safety Data Sheet (SDS) before use for detailed instructions regarding application, dilution and surface compatibility.

from€61.40

International VC GENERAL THINNER 1l

€33.00

International VC OFFSHORE EU

from€68.80

International VC TAR2

Epoxy protective coating for osmosis and corrosion protection VC Tar2 is a two-component epoxy primer providing premium osmosis protection for polyester (GRP) boats and anti-corrosion protection for steel and alloys on surfaces below the waterline. It creates a waterproof barrier for osmosis prevention and post-osmosis repair. International VC Tar2 is a two-component epoxy protective coating designed to protect the underwater hull of boats against water ingress, osmosis and corrosion. It is used as a protective barrier on polyester (GRP), steel, aluminium and other alloy boats and on lead keels, while also serving as an effective base for antifouling systems. The coating forms a hard, waterproof epoxy layer with very good resistance to moisture and seawater. Thanks to its high protective performance, it is widely used as preventive protection on new boats or as part of osmosis repair on older hulls. VC Tar2 offers excellent adhesion to properly prepared substrates and allows an effective protective barrier to be built up in several coats. Once cured, it is the ideal base for antifouling coatings. Key features Two-component epoxy protective coating For osmosis and corrosion protection Suitable for GRP, steel, aluminium and lead Not suitable for wood For use below the waterline only High resistance to water and moisture Excellent adhesion to properly prepared substrates Suitable for new builds and repairs Compatible with antifouling systems Colours: off white and black – alternating coats make application easier to control Apply by roller, brush or spray Recommended number of coats GRP osmosis protection: 3–5 coats GRP osmosis repair: 7 coats Steel, aluminium and alloys: at least 4 coats Lead: at least 3 coats Technical data Mixing ratio: 7 : 1 (by volume) Thinner: International VC General Thinner (max. 5%) Do not use at temperatures below 5 °C Note: Before use, always check the manufacturer's latest Technical Data Sheet (TDS) and Safety Data Sheet (SDS) for exact instructions on application, thinning and substrate compatibility.

from€58.00

International WATERTITE

from€37.16

International WOODSKIN

from€38.00

Loading products…

How to choose

Not sure which product?

1
Determine the boat type
Sailing yacht, motor yacht or speedboat — each type asks something different of the coating.
2
Choose the sailing area
Warm Mediterranean, cooler Adriatic or a lake — the conditions decide the type of antifouling.
3
Pick the system
Ablative, hard or copper-free — primer, antifouling and the extras that belong together.

Browse the coating systems

Why Choose Us?

Advantages that set us apart from others.

Choosing an antifouling contractor is an important decision, as it involves protecting your vessel, which represents a significant investment. Here are some reasons why many boat and yacht owners trust us:

More about us

Experience and Expertise
We take care of the protection and maintenance of various vessels, from smaller boats to yachts. We are well acquainted with the procedures and materials, so we guarantee safe and effective protection.
Quality Materials
We only use proven antifouling coatings from reputable manufacturers. This ensures long-lasting hull protection, lower fuel consumption, and better vessel gliding.
Individual Approach
Each vessel is different, so we always carry out an inspection before application and adapt the protection to your needs, boat type, and conditions of use.
Reliability
We adhere to agreed deadlines and perform the work accurately. Our priority is to prepare your boat for the new season in a timely and flawless manner.

Contact

Not sure what to choose?

Our team will advise you, present the protection options, and together we will find the best solution for your vessel.

Call +386 (0)51 855 299 Send an inquiry

info@antifouling.si

Grab the helm and give it a spin

0
turns: 0
top speed (rpm)

Products

Yachts programme

Not sure which product?

Determine the boat type

Choose the sailing area

Pick the system

Advantages that set us apart from others.

Experience and Expertise

Quality Materials

Individual Approach

Reliability

Not sure what to choose?

Yachts programme