SEAJETProducts

SEAJET Clear Coat – silicone for underwater lights

Name: SEAJET Clear Coat – silicone for underwater lights
Brand: SEAJET
SKU: seajet-silikon-za-podvodne-luci-mws
Price: 44.34 EUR

SEAJET Clear Coat – clear silicone coating for underwater lights, transducers and bow thrusters

€44.34

Select packaging below to see the exact price.

Available packaging

Select packaging …

Secure paymentFast delivery across Europe

Hazard pictograms

Read the label and safety data sheet before use.

Description

SEAJET Clear Coat – clear silicone coating for underwater lights, transducers and bow thrusters Biocide-free foul-release protection – lights stay bright, transducers stay accurate, bow thrusters stay efficient SEAJET Clear Coat is a clear foul-release coating designed to protect underwater lights, transducers (depth sounder, sonar and speed log sensors) and bow thrusters against fouling. It creates an exceptionally smooth, slippery surface to which algae, mussels and barnacles cannot attach firmly – any fouling only clings loosely and is washed away by the water flow while under way, or can simply be rinsed off. Because the coating is completely clear, it does not reduce the brightness of underwater lights or interfere with transducers. Conventional antifoulings are unsuitable for these parts – they are opaque and can impair the equipment's performance. Advantages Completely clear – does not reduce light output Does not interfere with transducers and sensors Foul-release action – fouling cannot attach firmly and is washed off Long-lasting protection Easy cleaning For salt and fresh water For boats up to 40 knots High coverage – a small pack is enough for several parts Applications Underwater lights Transducers and sensors (depth sounder, sonar, speed log) Bow thrusters and their tunnels Other small underwater parts Substrates: aluminium and alloys, GRP, steel, wood. Technical data Colour: clear Pack size: 0.25 l Coverage: approx. 20 m²/l Use: below the waterline Directions for use 1. Clean the part thoroughly – remove fouling, dirt and old coating. 2. Degrease the surface (e.g. with SEAJET Thinner A) and let it dry completely. 3. Stir the coating well before use. 4. Apply in thin, even coats by brush. 5. Allow the coating to dry completely before launching. Maintenance Clean coated parts from time to time with a soft sponge or cloth. Do not use scrapers or abrasive products, which would damage the silicone surface. Tip Do not let the silicone spread onto other surfaces – other paints will adhere poorly to them afterwards. Mask off the surrounding area with tape. Never paint zinc anodes. Safety labelling (GHS/CLP)

Similar products

SEAJET 039 PLATINUM / MONOCOMPONENT

SEAJET 039 PLATINUM MONO – premium-grade one-component SPC antifouling Premium SPC protection in a one-component version – no mixing, in pack sizes for larger vessels and professional applicators SEAJET 039 PLATINUM MONO is the one-component version of the premium antifouling SEAJET 039 PLATINUM. It is based on advanced Japanese SPC technology (Self-Polishing Copolymer): in contact with seawater the copolymer hydrolyses evenly and releases the active substances in a controlled way, so the hull stays clean and smooth throughout the entire protection period. Compared with the two-component version it is simpler to use, as it needs no mixing and has an unlimited usable life once opened. It is available in large pack sizes (5 l and 20 l), making it ideal for larger vessels, marinas, service yards and shipyards. Advantages Premium SPC technology – even, predictable protection One-component – no mixing, ready to use For demanding waters with heavy fouling, including warm seas Smooth hull – less drag, better speed and lower fuel consumption Large pack sizes – economical for larger areas Suitable for racing yachts and long passages Areas of use Underwater hull of sailing yachts and motorboats made of GRP, polyester, wood and steel (with the correct primer). Not suitable for aluminium and light alloys. For aluminium hulls, choose SEAJET 034 EMPEROR or SEAJET 038 TAISHO. Technical data Colours: black, greenish grey, graphite grey (RAL 7024), azure blue, dark blue (navy), red Packaging: 5 l / 20 l Coverage: approx. 10 m²/l per coat (theoretical) Film thickness: 100 µm wet / 44 µm dry per coat Application: brush, roller; spraying for professional use only Thinner: SEAJET Thinner A (0–7 %) Storage temperature: 5–35 °C Maximum time before launching: 6 months after application Drying times (at 20 °C) Touch dry: 1 hour Next coat: after at least 5 hours Fully dry: 12 hours Recommended coating system GRP / polyester and steel: SEAJET 117 Multipurpose Epoxy Primer + 2 coats of SEAJET 039 PLATINUM MONO Wood: SEAJET 015 Underwater Primer + 2 coats of SEAJET 039 PLATINUM MONO Over existing antifouling: if the existing coating is unknown or incompatible, first apply SEAJET 015 as a barrier coat Instructions for use Wash the hull with fresh water at high pressure. The surface must be clean, dry and free of grease, salt and fouling. Lightly sand the old coating and remove the dust. Stir the paint thoroughly before use. Apply at least 2 coats. Apply an extra coat to exposed areas – the leading edge of the keel, the waterline, the rudder and the drive units. Allow the coating to dry completely before launching. Tip The colour may change slightly after launching; this is normal and does not affect performance. For smaller boats, the two-component version SEAJET 039 PLATINUM is available in 2 l and 4 l packs. Never paint over zinc anodes. Safety labelling (GHS/CLP) Pictograms: GHS02, GHS05, GHS07, GHS08, GHS09 Signal word: DANGER H226 Flammable liquid and vapour. H315 Causes skin irritation. H318 Causes serious eye damage. H335 May cause respiratory irritation. H373 May cause damage to organs through prolonged or repeated exposure. H410 Very toxic to aquatic life with long lasting effects.

€485.99

SEAJET 039 PLATINUM

SEAJET 039 PLATINUM – premium two-component SPC antifouling The most powerful antifouling in the SEAJET range – protection for up to 3 years, for warm seas, long passages and racing yachts SEAJET 039 PLATINUM is an elite self-polishing copolymer (SPC – Self-Polishing Copolymer) antifouling developed on the basis of advanced Japanese SPC technology. In contact with seawater the copolymer hydrolyses chemically and releases the biocides very evenly, so the coating maintains constant, predictable protection throughout its entire service life while the hull stays clean and smooth. When correctly applied, it provides protection for up to 3 years in moderate waters. PLATINUM is the benchmark coating for warm seas with very heavy fouling, for long passages (blue water cruising) and for racing yachts where every knot counts. The two-component formulation produces an exceptionally hard, durable film. Advantages Premium SPC technology – even biocide release and constant protection Protection for up to 3 years – fewer haul-outs and lower maintenance costs For very heavy fouling and warm seas Smooth hull – less drag, better speed and lower fuel consumption Ideal for long passages and racing yachts For boats up to 40 knots Areas of use Underwater hull of sailing yachts and motorboats made of GRP, polyester, wood and steel that sail in seawater. Not suitable for aluminium or for use in fresh water. For aluminium hulls, choose SEAJET 034 EMPEROR A or SEAJET 038 TAISHO. Technical data Colours: dark blue (navy), medium blue, red, black Packaging: 2 l / 4 l (components A + B) Coverage: approx. 10 m²/l per coat (theoretical) Application: brush, roller; spraying for professional use only Thinner: SEAJET Thinner A (0–5 %) Pot life after mixing: approx. 36 hours at 20 °C Application temperature: at least 5 °C, humidity up to 85 % Maximum time before launching: 6 months after application Drying times (at 20 °C) Touch dry: 1–3 hours Next coat: after at least 5 hours Launching: after at least 36 hours Recommended coating system GRP and steel: SEAJET 015 Underwater Primer or SEAJET 117 Multipurpose Epoxy Primer + 2 coats of SEAJET 039 PLATINUM (apply over SEAJET 117 within 48 hours) Wood: SEAJET 015 Underwater Primer + 2 coats of SEAJET 039 PLATINUM Over existing antifouling: if the existing coating is unknown or incompatible, first apply SEAJET 015 as a barrier coat Instructions for use Wash the hull with fresh water at high pressure. The surface must be clean, dry and free of grease, salt and fouling. Lightly sand the old coating and remove the dust. Add all of component B to component A and mix thoroughly. Apply at least 2 coats. Apply an extra coat to exposed areas – the leading edge of the keel, the waterline, the rudder and the drive units. Wait at least 36 hours before launching. Tip For multi-season protection, apply additional coats – a thicker film means a longer coating life. Never paint over zinc anodes. Safety labelling (GHS/CLP) Signal word: DANGER Component A: Pictograms: GHS02, GHS05, GHS07, GHS08, GHS09 H225 Highly flammable liquid and vapour. H315 Causes skin irritation. H318 Causes serious eye damage. H332 Harmful if inhaled. H335 May cause respiratory irritation. H360 May damage fertility or the unborn child. H373 May cause damage to organs through prolonged or repeated exposure. H410 Very toxic to aquatic life with long lasting effects. EUH211 Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist. Component B: Pictograms: GHS05, GHS07, GHS09 H302 Harmful if swallowed. H318 Causes serious eye damage. H332 Harmful if inhaled. H410 Very toxic to aquatic life with long lasting effects. For professional users only.

from€202.50

SEAJET 038 TAISHO

SEAJET 038 TAISHO – super self-polishing copper-free antifouling Advanced copper-free protection for areas with heavy fouling – also suitable for aluminium SEAJET 038 TAISHO is a super self-polishing, copper-free antifouling based on a unique resin with a hydrolysing polymer. On contact with water, this technology releases the active ingredient evenly and in a controlled way, so the coating stays highly effective throughout the season and old layers hardly build up. Instead of copper it contains the biocide Econea, which is effective even at low concentrations. TAISHO is designed for boats in areas with heavy fouling and for owners who want modern, copper-free protection. Because it contains no copper, it is also suitable for aluminium hulls, and it comes in a wide range of colours, including white. Advantages Copper-free – suitable for aluminium, no risk of galvanic corrosion Super self-polishing action with a hydrolysing polymer – even protection all season long Minimal build-up of layers – easier maintenance in the following years For areas with heavy fouling For all materials: GRP, wood, steel and aluminium (with the correct primer) For salt and fresh water For boats up to 40 knots Bright, long-lasting colours, including white Application area Underwater hulls of sailing yachts and motor boats made of GRP, polyester, wood, steel and aluminium. Technical data Colours: white, medium blue, dark blue (navy), light red, black, light grey, dark grey Pack sizes: 0.75 l / 2.5 l / 5 l / 20 l Coverage: approx. 7–10 m²/l per coat (theoretical) Film thickness: 100 µm wet / 40 µm dry per coat Application: brush, roller; spraying for professional use only Thinner: SEAJET Thinner A (0–5 %) Application temperature: 5–35 °C Maximum time before launching: 3 months after application Shelf life: at least 2 years at 20 °C Drying times (at 20 °C) Touch dry: 2 hours Fully dry: 5 hours Recoat: after at least 7 hours Launching: after at least 12 hours Recommended coating system GRP and steel: SEAJET 117 Multipurpose Epoxy Primer or SEAJET 015 Underwater Primer + 2 coats of SEAJET 038 TAISHO Wood: SEAJET 015 Underwater Primer + 2 coats of SEAJET 038 TAISHO Aluminium: SEAJET 017 + SEAJET 117 Multipurpose Epoxy Primer + 2 coats of SEAJET 038 TAISHO Over existing antifouling: if the existing coating is unknown or incompatible, first apply SEAJET 015 as a barrier coat Instructions for use The surface must be clean, dry and free of grease, salt and fouling. Lightly sand the old coating and remove the dust. Stir the paint thoroughly before use. Apply at least 2 coats. Apply an extra coat to exposed areas – the leading edge of the keel, the waterline, the rudder and drive parts. Wait at least 12 hours before launching. Launch the boat no later than 3 months after application. Tip Drying times are longer at low temperatures and high humidity. Never paint over zinc anodes. Safety labelling (GHS/CLP) Pictograms: GHS02, GHS05, GHS07, GHS08, GHS09 Signal word: DANGER H226 Flammable liquid and vapour. H302 Harmful if swallowed. H315 Causes skin irritation. H318 Causes serious eye damage. H332 Harmful if inhaled. H335 May cause respiratory irritation. H360 May damage fertility or the unborn child. H362 May cause harm to breast-fed children. H410 Very toxic to aquatic life with long lasting effects.

from€55.63

SEAJET 037 COASTAL

SEAJET 037 COASTAL – hard antifouling for coastal and inland waters Reliable, affordable hard antifouling for sailing yachts and motor boats up to 70 knots SEAJET 037 COASTAL is a hard (hard matrix) antifouling based on a special synthetic resin, designed for leisure sailing yachts and motor boats. It forms a hard, mechanically resistant film that does not wear away while under way, making it suitable for fast boats up to 70 knots and for moorings where the boat dries out at low tide (drying moorings). It works effectively in coastal and inland waters – at sea, on lakes and on rivers. Thanks to its attractive price, wide choice of colours and easy application, it is an excellent choice for owners looking for reliable, durable protection without special requirements. Advantages Hard, durable film – resistant to abrasion and high speeds For boats up to 70 knots – also suitable for fast motor boats Suitable for moorings where the boat dries out at low tide For salt, brackish and fresh water High coverage – approx. 10.8 m²/l Fast drying – touch dry in just 30 minutes Wide choice of colours Great value for money Application area Underwater hulls made of GRP (glass fibre), polyester, wood and steel. Not suitable for aluminium. For aluminium hulls, choose SEAJET 034 EMPEROR A or SEAJET 027 SAIKŌ. Technical data Colours: red, dark blue (navy), medium blue, dark grey, black Pack sizes: 0.75 l / 2.5 l / 5 l / 20 l Coverage: approx. 10.8 m²/l per coat (theoretical) Dry film thickness: approx. 50 µm per coat Application: brush, roller; spraying for professional use only Thinner: SEAJET Thinner A (0–5 %) Application temperature: at least 5 °C, humidity up to 85 % Maximum time before launching: 6 months after application Shelf life: at least 2 years at 20 °C Drying times (at 20 °C) Touch dry: 30 minutes Fully dry: 4.5 hours Recommended coating system GRP / polyester and steel: SEAJET 117 Multipurpose Epoxy Primer or SEAJET 015 Underwater Primer + 2 coats of SEAJET 037 COASTAL Wood: SEAJET 015 Underwater Primer + 2 coats of SEAJET 037 COASTAL Over existing antifouling: if the existing coating is unknown or incompatible, first apply SEAJET 015 as a barrier coat Instructions for use The surface must be clean, dry and free of grease, salt and fouling. Lightly sand the old coating and remove the dust. Stir the paint thoroughly before use. Apply at least 2 coats. Apply an extra coat to exposed areas – the leading edge of the keel, the waterline, the rudder and drive parts. Allow the paint to dry completely before applying the next coat and before launching. Tip The colour may change slightly after launching; this is normal and does not affect performance. As this is a hard antifouling, old layers build up over time – sand thoroughly before recoating. Never paint over zinc anodes. Safety labelling (GHS/CLP) Pictograms: GHS02, GHS05, GHS07, GHS08, GHS09 Signal word: DANGER H226 Flammable liquid and vapour. H315 Causes skin irritation. H317 May cause an allergic skin reaction. H318 Causes serious eye damage. H335 May cause respiratory irritation. H362 May cause harm to breast-fed children. H373 May cause damage to organs through prolonged or repeated exposure. H410 Very toxic to aquatic life with long lasting effects.

from€37.66

Contact

Not sure what to choose?

Our team will advise you, present the protection options, and together we will find the best solution for your vessel.

Call +386 (0)51 855 299 Send an inquiry

info@antifouling.si

Grab the helm and give it a spin

0
turns: 0
top speed (rpm)