SEAJET 130 POLYURETHANE GLOSS VARNISH

Name: SEAJET 130 POLYURETHANE GLOSS VARNISH
Brand: SEAJET
SKU: seajet-130-polyurethane-gloss-varnish-mws
Price: 68.47 EUR

SEAJET 130 Polyurethane Gloss Varnish – two-component polyurethane varnish

€68.47

Select packaging below to see the exact price.

Available packaging

Select packaging …

Secure paymentFast delivery across Europe

Hazard pictograms

Read the label and safety data sheet before use.

Description

SEAJET 130 Polyurethane Gloss Varnish – two-component polyurethane varnish Very hard, high-gloss varnish with excellent UV protection – long-lasting wood protection in demanding marine conditions SEAJET 130 is a two-component high-gloss polyurethane varnish designed to protect and enhance the beauty of wood on boats. It forms an exceptionally hard, resistant film with excellent UV protection and long-lasting gloss. It is highly resistant to weathering, chemicals, salt and ageing, making it the right choice for wooden surfaces heavily exposed to sun, sea and wear. Compared with one-component varnishes, it offers much greater hardness, abrasion resistance and a longer service life – ideal for deck fittings, handrails, rails and other heavily used wooden surfaces. Advantages High, deep gloss – brings out the natural beauty of the wood Very hard, resistant film – resists abrasion and scratches Excellent UV protection – wood does not turn grey, gloss lasts a long time Resistant to weathering, chemicals and ageing For all types of wood For interior and exterior use High coverage – approx. 16.7 m²/l Area of use Wooden parts above the waterline: rails, handrails, battens and trim, hatches, doors, helm, interior fittings, furniture and other heavily used wooden parts. Above the waterline only. Technical data Type: two-component polyurethane varnish Gloss: high gloss Packaging: 1 l (base + hardener) Coverage: approx. 16.7 m²/l per coat (theoretical) Thinner: SEAJET Thinner P (max. 10 %) Mixing ratio: base 67 : hardener 33 (by volume) Next coat after 48 hours: lightly sand the surface with P360 sandpaper before application Directions for use 1. New wood: sand along the grain, remove the dust and degrease the wood. Clean oily woods (teak, iroko) with thinner before varnishing. 2. Refinishing: remove damaged or peeling varnish down to sound wood and sand the remaining varnish thoroughly. 3. Mix base and hardener in the specified ratio and stir thoroughly. If necessary, thin with SEAJET Thinner P (max. 10 %). 4. Mix only as much varnish as you will use within the pot life. 5. Apply with a good-quality brush in thin, even coats along the grain. 6. Lightly sand the surface between coats with P320–P400 sandpaper and remove the dust. Tip Do not varnish in direct sunlight, in damp weather, at low temperatures or on damp wood. Varnish in still air and in a well-ventilated area. Safety labelling (GHS/CLP) – base Pictograms: GHS02, GHS07 Signal word: WARNING H226 Flammable liquid and vapour. H317 May cause an allergic skin reaction. H332 Harmful if inhaled. H335 May cause respiratory irritation. H412 Harmful to aquatic life with long lasting effects. The hardener contains isocyanates – observe the labelling on the hardener label.

Similar products

SEAJET BILGE PAINT

from€29.68

SEAJET 132 POLYURETHANE TOPCOAT

SEAJET 132 Polyurethane Topcoat – two-component polyurethane topcoat Exceptionally high gloss and long-lasting colour retention – a professional finish for hull and deck above the waterline SEAJET 132 is a high-quality two-component polyurethane topcoat for interior and exterior boat surfaces above the waterline. It produces an exceptionally high, mirror-like gloss and a very hard, resistant film that retains its shine and colour for years despite strong sun, salt and weathering. Compared with one-component paints, it offers considerably greater hardness, resistance to abrasion, chemicals and UV rays, and a longer coating life. It is the right choice for owners who want a professional, long-lasting finish. Benefits Exceptionally high gloss – mirror-like appearance Long-lasting gloss and colour retention – excellent UV resistance Hard, tough film – resistant to abrasion, scratches, salt and chemicals Long coating life For interior and exterior use High coverage – approx. 12–16 m²/l Areas of use Hull above the waterline, superstructures, cabins, decks (with an added non-slip additive), hatches, metal and wooden fittings, boat interiors. Above the waterline only. Technical data Colours: pure white, cream, oyster white, mid blue, dark blue (navy), black, signal red, British racing green Packaging: 1 l (base + hardener) Mixing ratio: 75 : 25 (by volume) – base : hardener Pot life: approx. 50 minutes at 20 °C Coverage: approx. 12–16 m²/l per coat (theoretical) Film thickness: 61–82 µm wet / 30–40 µm dry per coat Application: brush, roller, spray Thinner: SEAJET Thinner P Application temperature: at least 12 °C, humidity up to 80 % Drying times (at 20 °C) Touch dry: 2 hours Fully dry: 8 hours Recoat: minimum 24 hours Recommended coating system GRP: SEAJET 117 Multipurpose Epoxy Primer (white) + at least 2 coats of SEAJET 132 Wood, steel, aluminium: appropriate surface preparation and primer (SEAJET 117; on aluminium first SEAJET 017) + at least 2 coats of SEAJET 132 Using the white version of SEAJET 117 as the base ensures an even colour in the topcoat. Instructions for use Clean, degrease and sand the surface (P180–P280). Remove the dust. Stir the base well, add the hardener in a 75 : 25 ratio and mix thoroughly again. Thin with SEAJET Thinner P if necessary. Mix only as much paint as you will use within approx. 50 minutes. Apply in thin, even coats. For the best gloss, use a foam roller and immediately tip off each coat with a brush (“roll & tip”). Lightly sand between coats with P320–P400 sandpaper and remove the dust. Apply at least 2 coats. Tip Do not paint in direct sunlight, at temperatures below 12 °C, in damp weather or onto a damp surface. Paint in still air and in a well-ventilated area. Safety labelling (GHS/CLP) – base Pictograms: GHS02, GHS07 Signal word: WARNING H226 Flammable liquid and vapour. H315 Causes skin irritation. H317 May cause an allergic skin reaction. H332 Harmful if inhaled. H335 May cause respiratory irritation. The hardener contains isocyanates – observe the labelling on the hardener label.

€63.97

SEAJET 122 BRILLIANCE

SEAJET 122 Brilliance – one-component high-gloss topcoat Deep, lasting gloss for hull and deck above the waterline – easy application, no mixing SEAJET 122 Brilliance is a high-performance one-component topcoat for boat surfaces above the waterline. It produces a deep, high gloss and a smooth surface that resists UV rays and weathering, so the paint keeps its colour and shine for a long time. It is suitable for GRP, wood, steel and aluminium. Because it is one-component, it is easy to apply by brush or roller – an excellent choice for owners refinishing their hull, superstructure, deck and other surfaces themselves. Benefits High, deep gloss – makes your boat look like new UV-resistant – the colour doesn't fade and keeps its shine One-component – no mixing, ready to use Easy application by brush, roller or spray gun For all materials: GRP, wood, steel and aluminium High coverage Wide choice of colours Areas of use Hull above the waterline, superstructures, cabins, hatches, wooden and metal fittings, boat interiors. Above the waterline only – not suitable for permanently submerged surfaces. Technical data Colours: pure white, oyster white, cream, mid blue, dark blue (navy), red, British racing green Packaging: 0.75 l Coverage: approx. 11–13 m²/l per coat by brush (theoretical up to 15.7 m²/l) Dry film thickness: approx. 35 µm per coat Application: brush, roller, spray Thinner: SEAJET Thinner U Shelf life: at least 3 years at 20 °C Drying times (at 20 °C) Recoat: after 24 hours Full cure: approx. 7 days Recommended coating system GRP: (optional) SEAJET 012 Universal Primer/Undercoat + 2–3 coats of SEAJET 122 Brilliance Wood, steel, aluminium: appropriate surface preparation and primer + SEAJET 012 Universal Primer/Undercoat + 2–3 coats of SEAJET 122 Brilliance Instructions for use Clean, degrease and sand the surface with P280–P400 sandpaper. Remove the dust. Stir the paint thoroughly before use. Thin slightly with SEAJET Thinner U if necessary. Apply in thin, even coats. For the best gloss, use a quality brush or a foam roller and immediately tip off each coat with a brush (“roll & tip”). Lightly wet-sand between coats with P400 or finer sandpaper and remove the dust. Apply at least 2 coats, or 3 for a deeper gloss. Tip Do not paint in direct sunlight, in damp weather, at low temperatures or onto a damp surface. Paint in still air so that dust doesn't stick to the fresh surface. Safety labelling (GHS/CLP) Pictograms: GHS02, GHS07 Signal word: WARNING H226 Flammable liquid and vapour. H317 May cause an allergic skin reaction. H336 May cause drowsiness or dizziness.

€32.36

SEAJET 120 UV VARNISH

SEAJET 120 UV Varnish – high-gloss wood varnish with UV protection Traditional one-component tung oil varnish – deep gloss and long-lasting protection for wood against sun and sea SEAJET 120 UV Varnish is a traditional one-component tung oil-based varnish designed to protect and bring out the beauty of the wood on your boat. It contains UV absorbers that shield the wood from harmful sunlight, prevent greying and discolouration, and extend the life of the coating. It builds a high, deep gloss and a smooth, taut surface that beautifully enhances the natural grain and colour of the wood. The varnish is abrasion-resistant and suitable for all wooden parts above the waterline – on deck, below deck or outdoors. Advantages UV protection – the wood does not grey or lose its colour High, deep gloss – a “glass-like” finish when built up in several coats Tung oil-based – an elastic film that moves with the wood Abrasion-resistant One-component – no mixing, easy to use For interior and exterior use Resistant to salt, brackish and fresh water (not for prolonged immersion) Area of use Wooden parts above the waterline: rails, handrails, wooden battens and trim, doors, hatches, helm, boat furniture and interior joinery, masts and other wooden parts. Not suitable for items that are immersed in water for long periods. Technical data Gloss: high gloss Pack sizes: 0.75 l / 2.5 l Coverage: approx. 12–14 m²/l per coat Dry film thickness: approx. 40 µm per coat Application: brush; spray Thinner: SEAJET Thinner U Application temperature: at least 5 °C, humidity up to 80 % Drying times (at 20 °C) Touch dry: 12 hours Recoat: after 24 hours Recommended number of coats and thinning For a deep, “glass-like” finish, apply 5–6 coats: 1st coat: thinned up to 50 % with SEAJET Thinner U (penetrates and saturates the wood) 2nd coat: thinned up to 25 % 3rd and subsequent coats: thinned up to 10 % Directions for use New wood: sand along the grain, remove dust and degrease. Clean oily woods (teak, iroko) with thinner before varnishing. Refinishing: remove damaged or flaking varnish back to sound wood and sand the remaining varnish thoroughly. Apply with a good-quality brush in thin, even coats along the grain. Between coats, lightly sand the surface with P320–P400 abrasive paper and remove the dust. For best results, varnish in the morning in dry weather so the coating can dry sufficiently before the evening damp sets in. Tip Maintain wooden surfaces regularly – once a year, sand lightly and apply 1–2 fresh coats. This way you avoid the costly job of stripping all the varnish.

from€30.51

Contact

Not sure what to choose?

Our team will advise you, present the protection options, and together we will find the best solution for your vessel.

Call +386 (0)51 855 299 Send an inquiry

info@antifouling.si

Grab the helm and give it a spin

0
turns: 0
top speed (rpm)