SEAJET 034 EMPEROR

SEAJET 034 EMPEROR – high-performance self-polishing antifouling, suitable for aluminium Premium protection for areas with very heavy fouling – for all types of vessels and hull materials, including aluminium SEAJET 034 EMPEROR is a high-performance self-polishing antifouling that combines advanced resin technology with an effective biocide system. It is designed for areas with very heavy fouling and reliably protects against slime, algae, mussels and barnacles. The surface layer renews itself evenly while under way, so the hull stays smooth and clean all season long. What sets it apart is its suitability for aluminium with no risk of galvanic corrosion, so you can use it on any hull material. It is also popular with racing sailors, as it can be burnished during the season to a very smooth, low-drag finish. It is available in bright, vivid colours, including white. Advantages For areas with very heavy fouling Suitable for aluminium – no risk of galvanic corrosion For all materials: GRP, wood, steel and aluminium Can be burnished during the season – ideal for racing boats Self-polishing action – smooth hull and less build-up of old layers Bright, durable colours, including white For vessels up to 40 knots Area of use Underwater hulls of sailing yachts and motorboats made of GRP, wood, steel and aluminium. For stern drives, outboard engines and small touch-ups, SEAJET 034 EMPEROR A is also available as a spray (400 ml). Technical data Colours: white, black, dark blue (navy), mid blue, light red Packaging: 0.75 l / 2.5 l / 5 l / 20 l Coverage: approx. 10 m²/l per coat (theoretical) Film thickness: 100 µm wet / 56 µm dry per coat Application: brush, roller; spraying for professional use only Thinner: SEAJET Thinner A Application temperature: air 5–35 °C, substrate 7–35 °C Maximum time before launching: 6 months after application Shelf life: at least 2 years at 20 °C Drying times (at 20 °C) Touch dry: 3 hours Fully dry: 12 hours Next coat: after at least 8 hours Launching: after at least 18 hours Recommended coating system GRP and steel: SEAJET 117 Multipurpose Epoxy Primer + 2 coats of SEAJET 034 EMPEROR Wood: SEAJET 015 Underwater Primer + 2 coats of SEAJET 034 EMPEROR Aluminium: SEAJET 117 Multipurpose Epoxy Primer + 2 coats of SEAJET 034 EMPEROR Over existing antifouling: if the existing coating is unknown or incompatible, first apply SEAJET 015 as a barrier coat Directions for use 1. The surface must be clean, dry and free of grease, salt and fouling. Lightly sand the old coating and remove the dust. 2. Stir the paint thoroughly before use. 3. Apply 2 coats. Apply an extra coat to exposed areas – the leading edge of the keel, the waterline, the rudder and drive parts. 4. Wait at least 18 hours before launching. Tip Drying times are longer at low temperatures and high humidity. Never paint over zinc anodes. Safety labelling (GHS/CLP) Signal word: DANGER Black, dark blue (and other colours): Pictograms: GHS02, GHS05, GHS07, GHS08, GHS09 H226 Flammable liquid and vapour. H315 Causes skin irritation. H317 May cause an allergic skin reaction. H318 Causes serious eye damage. H332 Harmful if inhaled. H335 May cause respiratory irritation. H360D May damage the unborn child. H373 May cause damage to organs through prolonged or repeated exposure. H410 Very toxic to aquatic life with long lasting effects. EUH032 Contact with acids liberates very toxic gas. White: Pictograms: GHS02, GHS07, GHS08, GHS09 H226 Flammable liquid and vapour. H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H335 May cause respiratory irritation. H360D May damage the unborn child. H373 May cause damage to organs through prolonged or repeated exposure. H410 Very toxic to aquatic life with long lasting effects. EUH032 Contact with acids liberates very toxic gas.