SEAJET 032 PROFESSIONAL

SEAJET 032 PROFESSIONAL – copper antifouling in large pack sizes Economical full-season antifouling in pack sizes for marinas, boatyards and larger vessels SEAJET 032 PROFESSIONAL is a copper-based antifouling for areas with moderate fouling. It is designed for professional applicators such as marinas, service yards and shipyards, as well as for owners of larger boats who need bigger quantities of paint at a good price. It provides reliable full-season protection and is compatible with almost all existing antifoulings, which makes maintenance easier. Advantages Economical – low price per litre in large pack sizes Full-season protection in areas with moderate fouling Compatible with almost all antifoulings – easy maintenance without removing the old coating Fast drying – launch just 12 hours after the last coat (at 20 °C) For salt, brackish and fresh water For boats up to 40 knots Application area Underwater hulls made of GRP (fibreglass), polyester, wood and steel. ⚠️ Not suitable for aluminium, as it contains copper. For aluminium hulls, choose SEAJET 027 SAIKŌ. Technical data Colours: blue, red, black Pack sizes: 3.5 l / 5 l / 20 l Coverage: approx. 9.2 m²/l per coat Film thickness: 109 µm wet / 50 µm dry per coat Application: brush, roller; spraying for professional use only Thinner: SEAJET Thinner A (0–5 %) Application temperature: 5–35 °C Maximum time before launching: 6 months after application Shelf life: at least 2 years at 20 °C Drying times (at 20 °C) Touch dry: 1 hour Fully dry: 5 hours Recoat: after at least 7 hours (no maximum) Launching: after at least 12 hours Recommended coating system New GRP and steel: SEAJET 117 Multipurpose Epoxy Primer or SEAJET 015 Underwater Primer + 2 coats of SEAJET 032 PROFESSIONAL Wood: SEAJET 015 Underwater Primer + 2 coats of SEAJET 032 PROFESSIONAL Over existing antifouling: if the existing coating is unknown or incompatible, first apply SEAJET 015 as a barrier coat Directions for use 1. The surface must be clean, dry and free of grease, salt and fouling. Lightly sand the old coating and remove the dust. 2. Stir the paint thoroughly before use. 3. Apply 2 coats. Apply an extra coat to exposed areas – the leading edge of the keel, the waterline, the rudder and the drive units. 4. Wait at least 12 hours before launching. Tip Drying times are longer at low temperatures and high humidity. For smaller quantities, SEAJET 031 SAMURAI is available in a 0.75 l tin. Safety labelling (GHS/CLP) Pictograms: GHS02, GHS05, GHS07, GHS08, GHS09 Signal word: DANGER H226 Flammable liquid and vapour. H315 Causes skin irritation. H317 May cause an allergic skin reaction. H318 Causes serious eye damage. H362 May cause harm to breast-fed children. H373 May cause damage to organs through prolonged or repeated exposure. H410 Very toxic to aquatic life with long lasting effects. EUH066 Repeated exposure may cause skin dryness or cracking.