SEAJET 031 SAMURAI

SEAJET 031 SAMURAI – slow-polishing antifouling Reliable season-long protection for areas with moderate fouling – excellent value for money SEAJET 031 SAMURAI is a self-polishing antifouling with a slow, controlled polishing rate. The surface layer renews itself slowly and evenly while under way, so protection lasts the whole season, the hull stays smooth and old layers do not build up. It is intended for sailing yachts and motorboats operating in areas with moderate fouling, such as most of the Adriatic, lakes and rivers. Thanks to its high coverage and attractive price, SAMURAI is one of the most popular choices among boat owners. Advantages Full-season protection thanks to slow polishing Self-polishing action – a smooth hull, less drag and less sanding at the next refit High coverage – economical consumption For salt, brackish and fresh water For boats up to 40 knots Wide range of colours Application area Underwater hulls made of GRP (fibreglass), polyester, wood and steel. ⚠️ Not suitable for aluminium. For aluminium hulls, choose SEAJET 027 SAIKŌ. Technical data Colours: sea grey (Shark Grey), blue, medium blue, red, black Pack sizes: 0.75 l / 2.5 l / 5 l / 20 l Coverage: approx. 9.2 m²/l per coat Film thickness: 100 µm wet / 46 µm dry per coat Application: brush, roller; spraying for professional use only Thinner: SEAJET Thinner A (0–5 %) Application temperature: 5–35 °C Shelf life: at least 2 years at 20 °C Drying times (at 20 °C) Touch dry: 2 hours Fully dry: 7 hours Recoat: after at least 7 hours (no maximum) Launching: after at least 12 hours Recommended coating system New GRP and steel: SEAJET 117 Multipurpose Epoxy Primer or SEAJET 015 Underwater Primer + 2 coats of SEAJET 031 SAMURAI Wood: SEAJET 015 Underwater Primer + 2 coats of SEAJET 031 SAMURAI Over existing antifouling: if the existing coating is unknown or incompatible, first apply SEAJET 015 as a barrier coat Directions for use 1. The surface must be clean, dry and free of grease, salt and fouling. Lightly sand the old coating and remove the dust. 2. Stir the paint thoroughly before use. 3. Apply at least 2 coats, and 3 coats to exposed areas (leading edge of the keel, waterline, rudder, drive units). 4. Wait at least 12 hours before launching. Tip Drying times are longer at low temperatures and high humidity. For areas with heavy fouling, choose a higher-performance SEAJET antifouling. Safety labelling (GHS/CLP) Pictograms: GHS02, GHS05, GHS07, GHS08, GHS09 Signal word: DANGER H226 Flammable liquid and vapour. H315 Causes skin irritation. H317 May cause an allergic skin reaction. H318 Causes serious eye damage. H362 May cause harm to breast-fed children. H373 May cause damage to organs through prolonged or repeated exposure. H410 Very toxic to aquatic life with long lasting effects. EUH066 Repeated exposure may cause skin dryness or cracking.