SEAJET THINNER A

SEAJET Thinner A – thinner for antifoulings and primers Genuine xylene-based SEAJET thinner – for the right coating consistency and tool cleaning SEAJET Thinner A is a xylene-based thinner for thinning SEAJET antifoulings, SEAJET 015 Underwater Primer and other SEAJET products where it is specified. Use it to adjust the consistency (viscosity) of the coating for a smooth, even finish, especially at low temperatures or when spraying. It is also suitable for cleaning brushes, rollers and spray equipment. Using the genuine thinner ensures that the coating retains all the properties intended by the manufacturer – an unsuitable thinner can impair drying, adhesion and performance. Which products is it for? All SEAJET antifoulings (021, 027, 030, 031, 032, 033, 034, 036, 037, 038, 039, 040) SEAJET 015 Underwater Primer SEAJET SEOSIL and SEAJET Tie Coat SEAJET Pellerclean Clear Coat Cleaning tools after using the products listed above Not for two-component epoxy and polyurethane coatings – use SEAJET Thinner E for SEAJET 117, and SEAJET Thinner P for SEAJET 132 and 2300. Advantages Genuine SEAJET thinner – fully compatible with the coatings Smooth, even finish with no brush marks Suitable for spraying and for application at lower temperatures For tool cleaning Technical data Base: xylene Pack sizes: 1 l / 5 l / 20 l Flash point: 25 °C VOC content: 870 g/l Directions for use 1. Add the thinner gradually, stirring the coating well in between. 2. For brush or roller application, as a rule do not add more than 5 % thinner (check the technical data sheet of the individual coating – some, e.g. SEAJET Tie Coat, call for more). 3. For tool cleaning, use the thinner immediately after finishing the job. Tip Too much thinner reduces the film thickness and with it the protection the coating provides. Use only in a well-ventilated area, away from sources of ignition. Close containers tightly after use. Safety labelling (GHS/CLP) Pictograms: GHS02, GHS07, GHS08 Signal word: DANGER H226 Flammable liquid and vapour. H304 May be fatal if swallowed and enters airways. H312 Harmful in contact with skin. H315 Causes skin irritation. H319 Causes serious eye irritation. H332 Harmful if inhaled. H335 May cause respiratory irritation. H373 May cause damage to organs through prolonged or repeated exposure.