Propspeed antifouling kit

Name: Propspeed antifouling kit
SKU: komplet-proti-obrascanju-antivegetativni-propspeed

Long-lasting protective antifouling kit for propellers and all submerged metal parts. Non-toxic, it prevents the growth of algae and limescale and protects against corrosion. Improves boat performance and reduces fuel consumption, noise and vibration

From €395.50

Select packaging below to see the exact price.

Available packaging

Select packaging …

Secure paymentFast delivery across Europe

Description

Similar products

SEAJET TRIPLE PACK

SEAJET Triple Pack – protection kit for propellers and drive parts Everything you need to protect your propeller from fouling – primer and premium antifouling in one kit SEAJET Triple Pack is a complete coating system for propellers, sterndrive legs, shafts and trim tabs. The kit contains three components: the two-component epoxy primer SEAJET 114 Propeller Primer (base + hardener) and the high-performance self-polishing antifouling SEAJET 034 EMPEROR A. Propellers and drive parts are particularly hard to protect because of high revs, cavitation and the metal substrate – ordinary antifouling adheres poorly and quickly flakes off. SEAJET 114 has been developed specifically for aluminium, aluminium alloys and bronze and provides excellent adhesion, while EMPEROR A is suitable for aluminium and delivers reliable protection all season long. The quantity is sized for the propeller and drive of one boat. Kit contents SEAJET 114 Propeller Primer – base SEAJET 114 Propeller Primer – hardener SEAJET 034 EMPEROR A – self-polishing antifouling Total volume: approx. 0.5 l Benefits Complete system in one kit – primer and antifouling that are matched to each other Excellent adhesion to metals – developed specifically for aluminium, alloys and bronze Premium EMPEROR A antifouling – suitable for aluminium, with no risk of galvanic corrosion One season of protection with two coats of antifouling For salt, brackish and fresh water For boats up to 40 knots The right quantity for a propeller and drive – no unnecessary leftovers Areas of use Propellers, sterndrive legs (Z-drive, sail drive), outboard motors, propeller shafts, trim tabs and other underwater metal parts made of aluminium, bronze and stainless steel. Technical data Antifouling colours: white, black, dark grey (Volvo Penta Dark Grey) Primer colour: grey Primer mixing ratio: 60 : 40 (by volume) – base : hardener Coverage of the complete system: approx. 2.5 m²/l Application: brush Directions for use Preparation: remove all dirt, fouling and old coating from the parts. Sand bare metal with P80–P120 sandpaper and factory-painted surfaces with P180. Remove the dust and degrease. Primer: thoroughly mix the SEAJET 114 base and hardener in a 60 : 40 ratio. Apply 1 thin coat. Wait approx. 10 hours (at 20 °C). Antifouling: stir SEAJET 034 EMPEROR A well and apply 2 coats, 6–7 hours apart. Wait at least 15 hours before launching. Tip Before application, mask off anodes, seals and any parts you don't want to coat. Never paint zinc anodes. Safety labelling (GHS/CLP) Pictograms: GHS02, GHS05, GHS07, GHS08, GHS09 Signal word: DANGER The kit contains several components – detailed hazard statements can be found on the label of each component.

€32.45

SEAJET PELLERCLEAN / SILICONE FOR SMALL OR LARGE SET

SEAJET Pellerclean Clear Coat – silicone topcoat (refill for the small or large set) Refresh your propeller's foul-release protection without reapplying the entire system SEAJET Pellerclean Clear Coat is the clear silicone foul-release topcoat from the SEAJET Pellerclean system, available separately as a refill. It is designed to renew protection on propellers, shafts, outdrives and trim tabs that are already protected with the Pellerclean system. The silicone layer creates an extremely smooth, slippery surface to which fouling cannot firmly attach – any growth is washed off by the water flow while under way. In areas of heavy cavitation (propeller blade edges), the topcoat gradually wears away, so it is advisable to renew it every season. With this product you can do so quickly and economically, without removing the primer. Which pack size should you choose? For the small set (315 ml): Clear Coat 115 ml – approx. 0.7 m² For the large set (1750 ml): Clear Coat 1250 ml – approx. 3.9 m² Benefits Biocide-free – environmentally friendly protection Quick seasonal renewal of foul-release protection Economical – no need to buy the complete set Clean propeller – better efficiency and lower fuel consumption For salt, brackish and fresh water When to use it? Seasonal renewal of an existing Pellerclean system that is still intact Local touch-up in areas of heavy wear and cavitation Clear Coat is applied exclusively over the SEAJET Pellerclean system (over Pellerclean Primer or existing Clear Coat). It will not adhere to bare metal, other coatings or antifouling – for new protection, use the complete SEAJET Pellerclean set. Instructions for use Wash the existing Pellerclean system thoroughly with fresh water and remove any growth. Do not sand, and do not apply primer over the topcoat. Allow the surface to dry completely. Stir Clear Coat thoroughly before use. Apply at least 2 coats – the second coat after 30 minutes. For best protection, use the entire contents of the pack. Allow the coating to dry completely before launching. Tip Repair damaged areas where bare metal is visible with the complete system (primer + topcoat). Never paint over zinc anodes. Safety labelling (GHS/CLP) Pictogram: GHS02 Signal word: WARNING H226 Flammable liquid and vapour. EUH208 Contains 3-aminopropyltriethoxysilane and N-(3-trimethoxysilylpropyl)ethylenediamine. May produce an allergic reaction.

€125.86

SEAJET PELLERCLEAN / BOXED SET

SEAJET Pellerclean – biocide-free propeller protection (set) Foul-release coating for propellers, shafts and trim tabs – fouling can't get a grip, and whatever does settle is washed away by the water SEAJET Pellerclean is a biocide-free kit that protects propellers and drive components against fouling. It works on the foul-release principle: it creates an exceptionally smooth, slippery surface to which mussels, barnacles and algae cannot firmly attach. Any growth is washed off by the water flow while under way, and the rest comes off with light cleaning. Your propeller stays clean, which means better efficiency, higher speed, lower fuel consumption and less vibration. Pellerclean is an environmentally friendly solution with long-lasting performance. Set contents Pellerclean Primer – two-component epoxy primer (base + hardener) Pellerclean Clear Coat – clear foul-release topcoat Small set (315 ml): base 157 ml + hardener 43 ml + topcoat 115 ml – sufficient for approx. 0.7 m² (propeller and leg of an outboard motor up to approx. 150 hp) Large set (1750 ml): sufficient for approx. 3.9–4 m² Benefits Biocide-free – environmentally friendly protection Foul-release action – fouling cannot attach firmly and is washed off Clean propeller – better efficiency, lower fuel consumption and less vibration Long-lasting protection For all propeller metals: bronze, stainless steel, steel, aluminium For salt, brackish and fresh water For boats up to 30 knots Everything in one set – primer and topcoat Areas of use Propellers, propeller shafts, sterndrive legs, outboard motors, trim tabs and other underwater metal parts. Technical data Colour: golden brown / beige primer, clear topcoat Packaging: 315 ml set / 1750 ml set Coverage: approx. 0.7 m² (small set) / approx. 4 m² (large set) Primer mixing ratio: 79 : 21 (by volume) or 85 : 15 (by weight) – base : hardener Application: brush Shelf life: up to 3 years at 20 °C Instructions for use Preparation: remove all dirt, fouling and any old coating or antifouling from the parts. Sand the surface with P80 sandpaper down to bare metal, remove the dust and degrease. Primer: mix the base and hardener thoroughly. Apply the 1st coat. The second coat can be applied after 15 minutes (at 20 °C) and no later than 7 days. Topcoat: stir the Clear Coat well and apply it within 30 minutes of the last primer coat. After 30 minutes, apply a second coat of topcoat. Allow the coating to dry completely before launching. Tip Work in a dry, well-ventilated area at temperatures above 15 °C. Observe the short recoat intervals – the topcoat bonds best to primer that is still fresh. Never paint over zinc anodes. Safety labelling (GHS/CLP) Pictograms: GHS02, GHS05, GHS07, GHS08, GHS09 Signal word: DANGER H225 Highly flammable liquid and vapour. H314 Causes severe skin burns and eye damage. H341 Suspected of causing genetic defects. H411 Toxic to aquatic life with long lasting effects. EUH205 Contains epoxy constituents. May produce an allergic reaction. The labelling applies to the components in the set – details for each individual component are given on its label.

from€101.62

International PROPELLER PRIMER 0.25 LT red

€24.90

Contact

Not sure what to choose?

Our team will advise you, present the protection options, and together we will find the best solution for your vessel.

Call +386 (0)51 855 299 Send an inquiry

info@antifouling.si

Grab the helm and give it a spin

0
turns: 0
top speed (rpm)