internationalMarine

International Thinner GTA220

Name: International Thinner GTA220
Brand: international
SKU: international-thinner-gta-220
Price: 187.00 EUR

€187.00

Select packaging below to see the exact price.

Colour

Available packaging

Select packaging …

Secure paymentFast delivery across Europe

Hazard pictograms

Read the label and safety data sheet before use.

Description

This item is intended for B2B sale. International Thinner GTA220 is a dedicated thinner and equipment cleaner for International epoxy coating systems such as Intergard 7500, Intergard 7600, Intershield 300 and Intergard 263. GTA220 is mainly used for cleaning spray equipment, brushes and rollers during and after the application of epoxy coatings. Where the product's technical data sheet explicitly allows it, it can also be added to improve workability in more demanding application conditions. It is used exclusively as a complement to an epoxy coating system – it is not intended for thinning polyurethane (PU), silicone or fluoropolymer coatings. For these, use International Thinner GTA713 or the dedicated GTA007 for antifouling coatings. **KEY FEATURES** - Dedicated thinner for International epoxy coating systems - Effective cleaning of spray equipment, brushes and rollers - Compatible with Intergard 7500, Intergard 7600, Intershield 300 and Intergard 263 - Clear, colourless product - For professional use **AREAS OF USE** Use GTA220 only in combination with International epoxy products for which it is explicitly specified in the technical data sheet as the appropriate thinner or cleaner. - Cleaning spray equipment after applying epoxy coatings (primers and intermediate coats) - Thinning epoxy coatings in more demanding application conditions, in compliance with local volatile organic compound (VOC) regulations - Keeping tools clean during breaks in work **APPLICATION** - Under normal application conditions, thinning is not required. If the technical data sheet of the specific product permits thinning, add a maximum of 5 % GTA220. - For cleaning, rinse all equipment thoroughly immediately after use, before the coating dries. - Do not mix GTA220 with materials that are not part of the epoxy coating system (e.g. polyurethane or silicone products). **COMPATIBILITY** GTA220 is the specified thinner and cleaner for the epoxy products Intergard 7500, Intergard 7600, Intershield 300 and Intergard 263. For polyurethane (Interthane) coatings, use International Thinner GTA713. **IMPORTANT** GTA220 is a flammable liquid intended for professional use only. Follow all safety instructions in the product safety data sheet (SDS) when working with it. The information in this description is not exhaustive. Always check the current technical and safety data sheets before use.

Similar products

International Thinner GTA713

€49.99

Intergard 7500

This item is intended for B2B sales. International Intergard 7500 aluminium is a high-performance, two-component pure epoxy universal primer with high volume solids (80 %), pigmented with aluminium, providing excellent long-term corrosion protection for steel surfaces. It is designed for professional protection in demanding marine environments. Thanks to advanced rheology technology, it offers improved airless spray application with lower thinner consumption and excellent edge retention. It is suitable for fast curing and application at low temperatures, down to –15 °C. Intergard 7500 is used as a universal epoxy primer on various areas of a vessel – from the underwater hull to water ballast tanks – in professional coating systems for newbuilding or maintenance. KEY FEATURES two-component pure epoxy coating with high volume solids (80 %) aluminium pigment for additional mechanical and corrosion resistance excellent long-term corrosion protection advanced rheology technology for easier spraying and lower thinner consumption excellent edge retention fast curing, can be applied at low temperatures, down to –15 °C suitable for the underwater hull, decks, superstructure and ballast tanks AREAS OF USE Intergard 7500 aluminium is intended for the professional protection of steel surfaces where effective, long-lasting corrosion protection and good resistance to mechanical stress are required. underwater hull of the vessel decks and steel structures exterior superstructure water ballast tanks mechanically prepared surfaces with shop primer APPLICATION Before application, surfaces must be properly prepared, clean and free of contaminants, abrasive blasted to Sa 2½ (ISO 8501-1:2007) or SSPC-SP10. The recommended application method is airless spray with a 0.63–0.79 mm tip at a pressure of at least 211 kg/cm². Small areas can be coated by brush or roller (several coats may be required). For thinning, use only International GTA220 (max. 5 %). For cleaning equipment, use International GTA822 or GTA220. For surface preparation, choice of equipment, application temperatures, drying times and overcoating intervals, always follow the current International Technical Data Sheet (TDS). COMPATIBILITY Intergard 7500 is used as a primer in System A (together with Intergard 263 and Interspeed 6400 / Interswift 6800HS) or in System B (together with Intersleek 737 and Intersleek 1100SR). As a subsequent coat over Intergard 7500, the manufacturer's official system recommends Intergard 7500 (an additional coat) or Interthane 990. Alternatives to this product in the primer role are Intershield 300 ENA aluminium (higher abrasion resistance) and Intergard 7600 (a more economical choice for less demanding applications). IMPORTANT Intergard 7500 is a professional two-component epoxy coating. Part A and Part B form a single system and must be used in the specified mixing ratio of 3 : 1. Technical data may vary depending on colour shade, area of use, coating system and application conditions. Always check the current technical and safety data sheets before use.

€448.75

International Intershield 300

This item is intended for B2B sales. International Intershield 300 is a premium two-component, abrasion-resistant epoxy universal primer with aluminium pigment, and the industry standard for the most demanding long-term corrosion protection of steel surfaces. Formulated on proprietary polymer technology, it allows fast curing and overcoating even at low temperatures. It stands out for its exceptional resistance to mechanical damage (abrasion), which reduces the risk of subsequent corrosion from impacts, scratches and wear. Its aluminium pigment (up to 10 % of dry film weight) provides an additional barrier against the spread of corrosion on steel and improved resistance to cathodic disbondment. Intershield 300 is used as a universal primer on all areas of the vessel – underwater hull, decks, superstructure and tanks – for both newbuilding and maintenance work, with more than 30 years of proven performance in the industry. KEY FEATURES two-component pure epoxy coating with aluminium pigment exceptional abrasion resistance and long-term corrosion protection industry standard with more than 30 years of proven performance fast curing, can be applied at low temperatures down to –15 °C (down to –20 °C in certain locations) suitable for use with cathodic protection suitable for potable water tanks (BS6920:2000 certification) suitable for newbuilding and maintenance work suitable for demanding marine and offshore environments AREAS OF USE Intershield 300 is designed for the most demanding professional protection of steel surfaces, where high resistance to mechanical damage matters as much as corrosion protection. underwater hull exterior superstructure and decks offshore structures and platforms water ballast tanks, storage tanks and potable water tanks mechanically prepared shop-primed surfaces or bare steel APPLICATION Before application, surfaces must be properly prepared, clean, dry and free of contaminants, abrasive blasted to Sa 2½ (ISO 8501-1:2007) or at least Sa2/SSPC-SP6 (for non-immersed surfaces). The recommended application method is airless spray with a 0.66–0.79 mm tip at a pressure of at least 211 kg/cm² (3000 psi). Smaller areas can be coated by brush or roller (several coats may be required). Use only International GTA220 for thinning and equipment cleaning (or GTA822 for cleaning). Thinning is usually not required. For surface preparation, choice of equipment, application temperatures, drying times and overcoating intervals, always follow the current International Technical Data Sheet (TDS). COMPATIBILITY Intershield 300 is used as the primer in System A (together with Intergard 263 and Interspeed 6400 / Interswift 6800HS) or in System B (together with Intersleek 737 and Intersleek 1100SR). Where the highest level of resistance to mechanical damage is required (e.g. ice conditions, harbour operation, offshore structures), Intershield 300 is the first choice over Intergard 7500 or Intergard 7600. IMPORTANT Intershield 300 is a professional two-component epoxy coating. Part A and Part B form a single system and must be used in the specified mixing ratio of 2.5 : 1. Technical data may vary depending on colour, area of use, coating system and application conditions. Always check the current technical and safety data sheets before use.

€436.41

B2B

International Intergard 7600

This item is intended for B2B sales. International Intergard 7600 is a high-performance two-component pure epoxy universal primer/intermediate coat with very good anticorrosive properties and good abrasion resistance. It is designed for the professional protection of steel surfaces in demanding marine environments. As a universal epoxy primer, it is suitable for various areas of the vessel, including the outer hull and oil tanks. It can be applied at low temperatures down to –5 °C and offers good edge retention. Intergard 7600 is used as a universal epoxy primer or intermediate protective coat in professional coating systems, for both newbuilding and maintenance work. KEY FEATURES two-component pure epoxy coating universal epoxy primer/intermediate coat very good corrosion protection good abrasion resistance suitable for various areas of the vessel, including the outer hull and oil tanks good edge retention can be applied at low temperatures down to –5 °C suitable for demanding marine environments and professional coating systems AREAS OF USE Intergard 7600 is designed for the professional protection of steel surfaces where effective corrosion protection and good resistance to mechanical stress are required. outer hull various interior areas of the vessel decks and steel structures oil tanks mechanically prepared shop-primed surfaces other properly prepared steel surfaces in marine environments APPLICATION Before application, surfaces must be properly prepared, clean, dry and free of contaminants. The recommended application method is airless spray. Smaller areas can be coated by brush or roller. Use only International GTA220 for thinning and equipment cleaning. For surface preparation, choice of equipment, application temperatures, drying times and overcoating intervals, always follow the current International Technical Data Sheet (TDS). COMPATIBILITY Intergard 7600 is used as the primer in System A (together with Intergard 263 and Interspeed 6400 / Interswift 6800HS) or in System B (together with Intersleek 737 and Intersleek 1100SR). For even higher resistance to mechanical damage, Intershield 300 ENA aluminium is available, and for higher volume solids, Intergard 7500 aluminium. IMPORTANT Intergard 7600 is a professional two-component epoxy coating. Part A and Part B form a single system and must be used in the specified mixing ratio of 3 : 1. Technical data may vary depending on colour, area of use, coating system and application conditions. Always check the current technical and safety data sheets before use.

€373.75

Contact

Not sure what to choose?

Our team will advise you, present the protection options, and together we will find the best solution for your vessel.

Call +386 (0)51 855 299 Send an inquiry

info@antifouling.si

Grab the helm and give it a spin

0
turns: 0
top speed (rpm)